%%LNG_LoadingPleaseWait%%

%%LNG_OurNewsletter%%


AUDIOENGINE - D2 24BIT

  •  1
  •  2
:
$249.00
%%LNG_SKU%%:
AAED2
%%LNG_Brand%%:
%%LNG_Condition%%:
%%LNG_Weight%%:
4.00 LBS
%%LNG_Shipping%%:
%%LNG_QuantityFull%%:
Bookmark and Share


%%LNG_ProductDescription%%

Cut the Cord with This Brilliant New Wireless DAC

Audioengine D2 Sends Wireless Digital (Up to 24bit/96k) to an Outboard DAC or Can Output an Analog Signal Through Its Own Internal Wireless DAC 

Finally, after asking every single manufacturer of computer audio products, someone gets it right! Our friends at Audioengine have just introduced D2, a wireless system to get our computer audio files from any computer to your stereo on its own wireless network. Transmit up to 24bit/96k audio with no software to install and no network connection. It’s completely independent of your home wireless network. You get a USB in and Toslink output for completely jitter-free audio. Connect into any DAC or use the internal DAC and go straight into an analog input. Now you don’t need to run wires throughout your house or put a computer next to your system. We heard the D2 system in action, and it finally brings wireless high resolution audio to everyone. We can’t recommend this digital audio solution highly enough!

Features:
  • Wireless bit-perfect 24/96 digital-to-analog converter
  • USB-to-S/PDIF converter
  • Mac or PC plug-and-play, no drivers or network setup
  • Precision receiver re-clocking for low jitter
  • USB and optical inputs
  • Optical and analog outputs
  • Based on Burr-Brown PCM1792 DAC
  • Broadcast HD audio from your computer to up to four D2 receivers
  • 24/96 LPCM over-the-air transmission

DAC type: Dual Mode USB and Optical (SPDIF) wireless DAC
Inputs: USB/Optical (SPDIF)
Outputs: RCA Stereo/Optical (SPDIF)
D/A converter: PCM1792A
Optical receiver: AK4117
USB controller: TI1020B

Full-scale output: 2.0V RMS (RCA)
Output impedance: 100 ohms
Power source:
   Sender: USB 5V or included external supply Receiver: Included external supply
   Power requirements: Sender: 270mA
   Receiver: 300mA
USB power filtering: 3-stage redundant regulation
SNR: >115db
THD+N: <0.0015%
Crosstalk: <-85db
Frequency response: 10Hz - 30KHz +/- 0.5db
Input bit depth: up to 24 bit
Input data rate: up to 192KS/s
Wireless range: >100ft
Wireless receivers supported: Up to 3 (24/96 to each receiver)

Environmental:
   Operating Temperature: 32 to 95 degrees F
   Non-operating Temp: -4 to 113 degrees F
   Relative Humidity: 5% to 95% non-condensing

Included accessories (D2 Sender):
   USB cable, 2ft
   Power adapter with detachable AC cord
   Setup Guide
   Microfiber bag
Included accessories (D2 Receiver):
   RCA cable, 6.5ft
   Power adapter with detachable AC cord
   Microfiber bag

Dimensions: 4.75x5.5x1"
Shipping weight: 4lbs
Shipping box dimensions: 15x9x5"


%%LNG_FindByCategory%%


%%LNG_WriteYourOwnProductReview%%

%%LNG_ProductReviews%%


%%LNG_AddToWishList%%

%%LNG_AddToCart1%% AUDIOENGINE - D2 24BIT %%LNG_ToYourWishList%%

%%LNG_YouRecentlyViewed%%