%%LNG_LoadingPleaseWait%%

%%LNG_OurNewsletter%%


Digidesign HD I/O 16 x 16 Analog Audio Interface Avid

  •  1
:
$2,299.00
%%LNG_SKU%%:
HDIOANALOG
%%LNG_Brand%%:
%%LNG_Condition%%:
%%LNG_Weight%%:
7.00 LBS
%%LNG_Shipping%%:
%%LNG_QuantityFull%%:
Bookmark and Share


%%LNG_ProductDescription%%

Digidesign HD I/O 16x16 Analog

 Pro Tools HD Series audio interface is designed to completely integrate with Pro Tools HD systems. Available in three different configurations, the 16 x 16 Analog offers the maximum in analog input and output. Since it uses all four card slots, expansion is not possible, but customization is.

The HD I/O has been redesigned with high quality converters and premium input & output circuitry, though it bears a physical resemblance to previous interfaces. The HD I/O 16 x 16 Analog gives you maximum performance, dependability, and control of all inputs, outputs, and routing right from the Pro Tools software interface.

Note! A minimum of Pro Tools HD 8.1 or higher software is required to use the HD I/O 16 x 16 Analog Pro Tools HD Series audio interface.

Features

High-performance AD/DA converters

Redesigned analog section with state-of-the-art filtering and design

Power supply improves noise performance and jitter

Lower latency

Updated digital card

192kHz AES/EBU and S/PDIF single-wire

ADAT S/MUX II and S/MUX IV (enclosure and expansion card)

"Curv" analog limiting circuitry on input

16 analog inputs (using DB-25)

16 analog outputs (using DB-25)

Additional digital I/O: 2 channels of AES/EBU I/O (supports 192kHz single-wire), 2 channels of S/PDIF I/O, 8 channels of ADAT I/O (supports S/MUX II and IV)

Specification

Converters: 24-bit

Sample Rates: 44.1, 48, 88.2, 96, 176.4 and 192kHz

Analog In: 4 x 25-pin D-Sub (16 inputs)

Analog Outputs: 2 x 25-pin D-Sub (16 outputs)

Digital Input Connectors:
1 x XLR AES/EBU
1 x Lightpipe ADAT optical (also functions in 2-channel optical S/PDIF mode)
1 x RCA coaxial S/PDIF

Digital Output Connectors:
1 x XLR AES/EBU
1 x Lightpipe ADAT optical (also functions in 2-channel optical S/PDIF mode)
1 x RCA coaxial S/PDIF

Other Connectors:
2 x BNC Wordclock I/O
2 x BNC Loop Sync I/O
2 x DigiLink Mini Ports
1 x 9-pin Expansion Port

MIDI In/Out: No

Headphone Output: No

THD + N:
ADC: -114dB (0.0002%)
DAC: -110dB (0.00032%)

Dynamic Range:
ADC: -122dB
DAC: -125dB

Frequency Response:
ADC: 20Hz to 20kHz, +/-0.03dB
DAC: 20Hz to 20kHz, +/-0.15dB

Power Requirements: 100/240V, 50/60Hz, internal power supply

Minimum System Requirements: Due to constantly changing requirements, for comprehensive hardware specifications and system requirements, please refer to Avid's website

Dimensions (WxDxH): 2U rack-mountable chassis

Weight: Not specified by manufacturer

Specialties: Curv and Soft Clip processing; Card swap only - no further expansion available


%%LNG_WriteYourOwnProductReview%%

%%LNG_ProductReviews%%


%%LNG_AddToWishList%%

%%LNG_AddToCart1%% Digidesign HD I/O 16 x 16 Analog Audio Interface Avid %%LNG_ToYourWishList%%

%%LNG_YouRecentlyViewed%%