Loading... Please wait...

Our Newsletter

Line 6 DT50 112 25/50W 1x12 Guitar Combo Amplifier

  • Image 1
67.00 LBS
Calculated at checkout
Bookmark and Share

Product Description

Line 6 DT50

 goes further than any other amplifier to produce the best amp tones.

The 25/50W guitar amplifier breathes unparalleled warmth, feel and depth into the 4 classic amp voicings on which all great amps are based. New Line 6 HD modeling technology and reconfigurable analog circuitry (courtesy of Reinhold Bogner's flexible 50W, EL34 tube design) produce the most authentic tones.

The classic 2-channel design offers ease, speed and total analog reconfiguration with the flick of one switch. All muscle, no learning curve.

(2) 12AX7 preamp, (2) EL34 power amp, 12" Custom Celestion G12H90 speaker, connects to POD HD for seamless floor control and more.

New Version 1.20 Firmware is available for the DT50! To download your free firmware, you will need to download the Line 6 Monkey upgrading tool. You can find it here.


Version 1.20 Features And Fixes:
Improved communication with POD HD500 via L6 LINK (see the L6 LINK Connectivity Guide for specifics)

DT50 112 25/50W 1x12 Guitar Combo Amp
- Advanced HD modeling technology
- Reinhold Bogner's most flexible tube design
- 2 x 12AX7 preamp tubes
- 2 x EL34 power amp tubes
- Simple and straightforward 2-channel design
- Each channel has Drive, Bass, Mid, Treble, Presence, Reverb, and Channel Volume controls
- Master volume control
- High and Low inputs
- Reconfigurable analog components (Class A/Class AB; Pentode/Triode)
- Complete, 1-touch analog reconfiguration (via Channel select switch)
- Low-power mode
- 1x12" Celestion custom G12H90 speaker; 1x12" Celestion Vintage 30 speaker
- L6 LINK in/thru connection for POD HD integration
- Serial effect loop with level control
- Footswitch jack for channel switching
- XLR direct out with cabinet simulation and ground lift switch
- 4-, 8-, and 16-ohm speaker outs


Amp Type: Adaptive
Speaker: Custom Celestion G12H90
Modeling: Line 6 HD Modeling
Tube Section: 2x12AX7 Preamp; 2xEL34 Power Amp Designed by Reinhold Bogner
Voicings: Selectable, (Cathode or Fixed Bias)
Bias Types: Type I (Tight Feedback, California Clean) Type II (Looser Feedback, Crunchy British Feel) Type III (Zero Negative Feedback, Chimey Brit Feel) Type IV (Modern Feedback, Higher Gain)
Operating Class and Wattage: Selectable: Class A (25W) <> Class AB (50W)
Power Tube Config: Selectable: Pentode <> Triode
Foot Controller: POD HD300/400/500 via L6 LINK™; Standard 1/4" Tip-Sleeve Footswitch for Channel Switching
Other I/O: Serial FX Loop, MIDI IN/OUT, Cabinet Simulated Direct Out
Dimensions: 12 x 27 x 23 inches
Weight: 67 pounds

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the Line 6 DT50 112 25/50W 1x12 Guitar Combo Amplifier to your wish list.

You Recently Viewed...