%%LNG_LoadingPleaseWait%%

%%LNG_OurNewsletter%%


Shure P9T Wireless Transmitter (G6 Band, 470-506 MHz)

  •  1
:
$399.00
%%LNG_SKU%%:
SHUREP9TG6
%%LNG_Brand%%:
%%LNG_Condition%%:
%%LNG_Weight%%:
1.00 LBS
%%LNG_Shipping%%:
%%LNG_QuantityFull%%:
Bookmark and Share


%%LNG_ProductDescription%%

Shure P9T

 Wireless Transmitter can be used in conjunction with a P9R bodypack receiver as part of a PSM900 wireless personal monitoring system. The P9T's half-rack design makes it easy to transport, and it can be installed in any standard equipment rack.

The P9T features patent-pending CueMode technology to send multiple mixes or channels to a receiver, and a Scan and Sync function to quickly sync with a receiver over an IR link. An RF mute switch allows you to set up the system without causing RF interference. The front panel offers an input gain control and LED level meters, as well as a 3.5mm headphone jack for convenient monitoring and a backlit LCD that displays vital info. The rear panel offers XLR/TRS combo inputs, allowing it to accept a variety of audio sources. Loop out connectors make it easy to create multiple mix setups.

The P9T transmitter is compatible with the PA421SWB and PA821SWB antenna combiners, and offers front or back mountable antennas.

Features

Frequency band: G6

Transmitter for PSM 900 system - works with P9R receiver

CueMode allows monitoring of different stage mixes

RF Mute Switch allows system setup without causing RF interference

Syncs to a P9R bodypack quickly and easily over IR link using Scan and Sync

Front-panel audio input gain adjustment and LED level meter with clipping indicator

Front- or back-mountable antennas

Compatible with PA421SWB and PA821SWB antenna combiners

Loop out connectors for multiple mix setups and easy installation

Switchable +4dBu and -10 dBV input level

Balanced, 1/4-inch and XLR connectors

Bit-mapped, backlit LCD

Includes rackmounting hardware

1/8-inch headphone out on the front panel for easy monitoring

Specification

Output Power: 10/50/100mW, Selectable (Regionally Dependent)

Output Impedance: 50 Ohms (RF, Typical)

Input Level: +4dBu and -10dBV, Switchable

Connectors:
2 x XLR/TRS Combo Inputs
2 x 1/4" Loop Outputs
1 x DC Power Input
1 x Antenna Connector
1 x 3.5mm Headphone Jack

Power Requirements: 415mA, Typical (RF On, 100mW Power Mode, No Audio)

Dimensions (WxDxH): 7.75 x 6.5 x 1.6" (197 x 166 x 42mm)

Weight: 1.9 lbs (0.85kg)


%%LNG_WriteYourOwnProductReview%%

%%LNG_ProductReviews%%


%%LNG_AddToWishList%%

%%LNG_AddToCart1%% Shure P9T Wireless Transmitter (G6 Band, 470-506 MHz) %%LNG_ToYourWishList%%

%%LNG_YouRecentlyViewed%%